Epoxy Waterproofing Resin In Bopal

Epoxy waterproofing resin is a durable, chemical-resistant material used for protecting surfaces from water ingress, corrosion, and wear. It’s commonly used in construction, industrial, and marine applications due to its strong adhesion, hardness, and long-lasting waterproof barrier.

🔍 Overview of Epoxy Waterproofing Resin

Feature Details

Base Material Epoxy (thermosetting polymer)

Components Two-part system: Resin + Hardener

Curing Chemical reaction (exothermic), usually at room temperature

Appearance Clear or colored; glossy finish

Water Resistance Excellent – forms a seamless, impermeable barrier

Adhesion Strong adhesion to concrete, metal, wood, masonry, tiles

Typical Thickness 1–3 mm (can vary depending on application)

🏗️ Common Applications

Concrete floors & walls (e.g., basements, water tanks, swimming pools)

Roof waterproofing (when combined with membranes or coatings)

Bathrooms, kitchens, and wet rooms

Industrial floors (chemical and abrasion resistance)

Marine & boat hulls

Bridges, tunnels, and parking structures

✅ Advantages

Excellent waterproofing and chemical resistance

High mechanical strength and abrasion resistance

Bonds well to most surfaces

Durable and long-lasting

Can be applied in thin or thick layers

Often resistant to mold, fungus, and UV (if modified)

⚠️ Limitations

Requires proper surface preparation (dry, clean, and stable)

Some types are not UV resistant (yellowing occurs; topcoat may be needed)

Can be brittle if not modified with flexible additives

Costlier than some other waterproofing options like bitumen

Needs careful mixing in the correct ratio (resin : hardener)

Application may require professional skills for large areas

🧪 Technical Properties (Typical)

Property Typical Value

Density ~1.1–1.3 g/cm³

Pot life 20–45 minutes (depends on temp.)

Curing time 24–72 hours

Compressive strength 60–100 MPa

Tensile strength 20–40 MPa

Shore D Hardness 75–85

Water absorption <0.2%

🛠️ Application Method

Surface Prep: Remove dust, oil, moisture, and loose materials.

Priming (optional): Apply a thin coat of epoxy primer.

Mixing: Combine resin and hardener in exact proportions.

Application: Brush, roller, trowel, or spray (depending on viscosity).

Curing: Allow full curing (avoid water exposure during this time).

Topcoat (if needed): For UV resistance or decorative finish.

🔄 Variants and Modifications

Flexible epoxy: Contains elastomers for better crack-bridging

UV-resistant epoxy: Formulated with stabilizers or polyurethane topcoat

Self-leveling epoxy: For smooth, seamless floor finishes

Filled epoxy: With silica or quartz for heavy-duty flooring